Separate the fruit from the bunch through strong vibrating. 1.The sterilized FFB will be transport to thresher platform by scraper conveyor. 2.We adopt advanced Drum type thresher, insider diameter is φ1800mm, length is 5000mm. The material of main shaft is #45 steel (main chemical composition is C0.42~0.50%, Si0.17~0.37%, Mm0.50~0.30%, P≤0.035%, S≤0.035%, Cr≤0.25%, Ni≤0.25%, Cu≤0.025%). 3.Sterilized
Crude palm kernel oil process line includes polishing, crushing and pressing. Polishing: Separating nuts and fiber by wind drying system. Pressed cake broken by breaking screw conveyor and then transported into the fiber separation air net and fiber polishing roller for fiber separating. The separated fiber material is sent to the boiler room as fuel;
Palm oil mill process line includes sterilizing, threshing, digesting, pressing, clarification, purification and drying. Then you can get crude palm oil. Crude palm oil standard: FFA less than 5% Moisture less than 0.1% Dirt less than 0.02% Kernel standard: Broken kernel less than 15% Moisture less than 7% Dirt less than 6% Production quality index: 1. transparency
Cold press The definition of cold press is that oil seeds are pressed under normal temperature and low temperature. Cold press oil make sure all kinds of nutrition in the materials are not been damaged. Cold press oil is also helpful for people’s healthy. When cooking,cold press oil will generate less cooking fumes than hot
Solanesol is Extracted from tobacco leaf/leaves and a starting material for many high-value bio-chemicals,especially used in the combination of vitamin K12,and coenzyme Q10.It is also a potentiating agent in these medicines.The research shows that after introducing “solanesol” radical into the structure of some medicines,the effect are increased distinctly.With solenesol as its primary material,Co-enzyme Q is
During the technology of leaching, the leaching process is the most important section of the whole technology, no matter it is for directly leaching from flacks, leaching of pre-pressed cake or leaching of puffed material, which working principle are the same, but the pre-treatment of the material is different, so there are some of the
The design, manufacturing,and installation are all CE and ISO quality approval. The Fresh Fruit Bunches (FFB) is available after 3 years plantation. Palm fruits are sent into crude palm oil processing machine with following production process: 1. Weighing. Transport palm fruit to factory after truck weighing so as to make prompt settlement and production cost
Pre-treatment of palm oil processing line with input capacity of 1000 TPD. Advanced designing, modern technology, high quality equipment, excellent installing and commissioning, round after-sales and long time service. As a national famous company in this field, we are ready to help you in botany and animal oil engineering projects from the very beginning to the
Pre-treatment of oil-bearing material means do material cleaning, husking, peeling, breaking, softening, flaking, puffing, heat-moisture treatment and drying before process oil pressing of the material, is on purpose of removing impurities of the material and make it of certain structural performance to accommodate different oil press technology. Base on different oil materials and oil extraction technology,
The Operation In Sterilization Station Of Palm Oil Processing
The Operation In Sterilization Station Of Palm Oil Processing: 1. By Scraper Conveyor, FFB be transported to the top of sterilizing tank.Falling into sterilizing tank from feed inlet. 2. Sterilizing tank: Adopt vertical type sterilizer, Welded up by Q235B material (Chemical composition:C 0.12~0.2%,Si 0.12~0.3%,Mm 0.3~0.7%,P<0.045%,S<0.045%,Cr<0.3%,Ni<0.3%,Cu<0.3%). 3. After FFB be transported into sterilizing tank (202), close the
READ MORE