1. Feeding must be steady and slow at the beginning to avoid blocking. 2. In the case no cake is extrude outward, return back the screw for l-2 circle. If there is still no cake is observed machine needs to be shut down and checked, however, in any case, operating the 6yl oil press machine
6YL Series Oil Screw Press Machines Preparations Before Operating 1. 7kg of lubricant needs to be filled into the gearbox. 2. After installing the 6yl series oil screw press machine, check whether lubricant has been filled in,bolts have been tightened, and handles are operable. 3. Check large pulley whether it is loose or blocked, repair it
Installation The 6YL series oil screw press machine must be installed by bolts firmly on the foundation and be kept horizontal. Lubrication Oil press is lubricated by lubricating oil and grease, see table NO. Lubrication Oil Time span Replacement Period 1 Adjusting bolt Mechanical oil No.20 1-2time/day 2 Bevel gear Mechanical oil No.20 1-2time/day 3 Bearing bush Mechanical oil No.20 1-2time/day 4 Gearbox Mechanical oil No.20 12KG for 1st running Six Months 5
Operation principle When 6YL series oil screw press machines operating prepared material enters extruding chamber from the hopper and then moves forwards by the rotating pressing screw and that is pressed. Under the high-pressure condition in the chamber, friction between material and screw. Between material and chamber will be created, which also creates friction and relative
Palm kernel expeller is a by-product of the crushing and expelling of oil from palm kernel. This product is known for its balanced energy and protein, high fibre, good level of residual oil and high in palmitic acid. For many years, it has been used in compound feeds for adult ruminant livestock such as dairy
Harmless equipment processing process: material by pre broken by material pump delivered to cans; high temperature and high pressure steam sterilization, discharge pressure and exhaust screening, dust and exhaust gas processing, storage material weighing, packing, storage, drying, degreasing, cooling treatment. A: incoming link This link is considered under high temperature and high pressure treatment charging
Production: 5-7 tons / 24 hours Product introduction: 6YL- 25 Automatic Feeding Wrung Filter Integration Oil Press Machine is widely used for machining rapeseed, cottonseed, soybean, peanut, sesame, tea seed, sunflower, futong benevolence, olives, coconut fruit, palm fruit (kernel) and other granular fuel, may also used for rice bran, corn germ oil and red flowers such
Canola oil processing is a complicated process. Following preconditioning, canola seeds are next crushed and flaked before being heated slightly. These processes help to maximize oil recovery. The canola flakes are then “prepressed” in screw presses or oil expellers to reduce the oil content from about 42% in the seed (on an 8% moisture basis)
Soybean Oil Processing Introduction
Soybean oil processing usually strat from soybean seed oil preparation. The soybeans need to be cleaned, dried and dehulled before sending to the next extraction process. The soybean hulls needs to be removed because they absorb oil and give a lower yield. This de-hulling is done by cracking the soybeans and a mechanical separation of
READ MORE