The biodiesel can be used as substitute product of petroleumfuel . It is can be produced by vegetable oil fat and animal fat , but at present , most people using the fatty acid, swilloil , used cooking oil and leftovers which produced in refining process as the materials. The biodiesel not only can be
Biodiesel can be used in pure form (B100) or may be blended with petroleum diesel at any concentration in most injection pump diesel engines. 1. Distribution Since the passage of the Energy Policy Act of 2005, biodiesel use has been increasing in the United States. In the UK, the Renewable Transport Fuel Obligation obliges suppliers
Critical process in our waste cooked oil biodiesel production process machine: Methanol esterification process 1. Atmospheric esterification with powerful ultrasonic cavitation technology (patent), its characteristic is using atmospheric pressure esterification, ester exchange, cooperate with our original powerful ultrasonic cavitation technology scheme, shorten the reaction time for two-thirds of the time, relative to save a lot
Capacity: 5-500 tons/day Raw materials: all kinds of oil, like waste oil, waste cooking oil, plant seed oil,algal oil Products: biodiesel Biodiesel plant main equipments: pumps, filters, dryers, tanks, reboilers, esterification can, condensers, Distillation column, rectification tower etc Flow chart: pretreatment—–Esterification process—–Washing section—-Methyl ester rectification
1.Can work successfully under low temperature, can be at -10℃ without additive. 2.Good lubricating performance, less damage to Engine 3.Flash point higher more safer in storage, transportation, and usage. 4. reduce 30% sulfide emissions, even 70% when with catalyst. 5. less small particulates in the waste gas. 6. No aromatic compounds in biodiesel. 7. Reduce
Toilet soap making machine is designed to produce toilet soap. Material is soap noodle (soap grains). Product process: 1. Mix all materials by mixing agitator, grind soap noodles by three-roller mill, make soap materials into soap bar by vacuum plodder, and cut soaps by stamping machine. 2. Distribution boxes are used to control all the motors
1. The squeezing bolt of oil press machine is made of alloy steel treated by carburization to improve its surface hardness and wear resistance. 2. The squeezing bolt is grinded by surface grinder to ensure the accuracy of oil thread and improve oil yielding rate. 3. The standard components for power distribution, vacuum and heating
1.Screw thread The screw thread is made of Cr12 die steel.Cr12 die steel has a high resistance to abrasion,which can prolong the service life of the machine. And our screw thread adopts three-grade press,which can press the materials completely. 2.Grooves for material rotation There is groove in both side of each screw row.It can make
The hydraulic scraped car baler machine for can extrude all kinds of metal leftover material (such as the steel shavings, steel scrap, aluminum scrap, copper, stainless steel scrap and automobiles waste scrap, etc.) into cuboid, octagon, cylinder, etc, all kinds of qualified burden, can reduce cost of transportation and smelting cost, also can improve the
What’s the biodiesel plant?
Biodiesel production process from vegetable oils, animal fats, and waste/used cooking oil through a chemical process. With annual capacity growing every year, biodiesel plants are an important part of our energy future. As biodiesel use and demand has grown, so too has the number of plants and the diversity of every locations. What’s the technical standards
READ MORE